1. Cold Cutting and Beveling improves safety.
2. Cutting and Beveling simultaneous.
3. Split Frame: easy mounted on pipeline.
4. Tools feed automatically.
5. Fast, Precision, On-site Beveling.
6. Minimal Axial and Radial clearance.
7. Light weight and compact design.
8. Easy set-up & Operation.
9. Machining heavy-wall pipe from 3/4" up to 56.
Machine body structure and material:
1. Standard Model: Alloy steel with ionic nitriding treatment, the
weight is a bit heavy but solid and durable;
2. Light Model: Aerospace grade aluminum alloy. Light weight and
suitable for high-altitude operation.
3. High speed to cut the pipe
4. Pipe cutting is to rotate machine automatically
5. Use round blade with 1300W electric motor to cut
6. Pipe will be cut after the machine rotated 360 degree
7. The powerful and stable electric motor have 6 choices;
8. Driveing Type:Electric Servo motor.
9. Can Be Process Diffferent Material Pipe:Carbon Steel,Stainless
Steel,Alloy And Ohers.
10. Angle:Beveling angle as per your required.
Before you place order to us, please let us know the following
information:
1. Choose the right Model.
2. Confirm your electric power supply ( Voltage, frequency and
phase).
3. Confirm the beveling angel required.
4. Confirm the welding joint required (U, V, Double V or Compound
preparation).
5. Advise your pipe material ( Carbon steel, stainless steel or
others).
6. Other special demands about machine.
7. The spare parts needed.
8. Advise pipe wall thickness (Important).
Tool bit for Split Frame Pipe Cutting and Beveling Machine
pipe beveling machine
flange facing machine
Type: cutting tool bit
beveling tool bit :single V,double V,U,J
seal groove tool bit :V ,U,J
Cutting angle: 0 degree,15degree,30degree,37.5 degree,45 degree,60
degree
Material: HSS / Cemented carbide /Ceramic tip
Note: the material of the tool bits is W18Cr4V,which can be used
for cutting and end slopping process of
different carbon steel. If users need tool bits for alloys,
stainless and cast steel, please contact the factory
for availability.
The tool bits above is standard tools, if users need other degrees,
please inform us before purchase.
Tool:
Technical Specifications:
| Model | working range(ID-OD) | wall thickness | rotation speed |
| OCP-715 | Φ560-715(22”-28”) | ≤30mm | 11 r/min |
