The product description
The chamfered beveling machine developed for small-sized plates is
equipped with high-strength
polyurethane as the pressure wheel, which can realize continuous
rolling compaction, and the high-
efficiency and stable processing can be realized for the bar plate
and the small plate. The small size of the
plate is more suitable, and the pb-10d groove with its strong power
and high efficiency has been highly
praised by many customers, with its smooth and clean surface and
high efficiency and convenient
movement.
This machine mainly USES the principle of milling, milling the edge
of the steel plate according to the
desired Angle, so as to obtain the necessary groove for welding.
Applicable to common structural steel
, stainless steel, cast iron, hard plastic, non-ferrous metals and
other materials! The flat beveling machine
is chamfered on the end face before welding
The special tool of groove solves the defects such as improper
Angle, rough slope surface and loud
working noise of operation process such as flame cutting and
grinding by grinding machine
, can automatically walk according to the material edge
automatically, this machine has the adjustment
Angle convenient, the operation convenient, the unit time
efficiency is high, the environmental protection
has the operation simple, the Angle standard, the surface is
smooth.
Technical Parameter
| Power | AC 380V 50HZ |
| Total Power | 3400W |
| Spindle Speed | 1050r/min |
| Feed speed | 0~1500mm/min |
| Clamp Thickness | 6~60mm |
| Clamp Width | 〉80mm |
| Process Length | 〉300mm |
| Slop Angle | 0°-90°(Adjustable) |
| Single groove | 10-20mm |
| Worktable Height | 820~860mm |
| Net Weight | 220kg |
| Processing Materials | Carbon Steel, Stainless Steel, Aluminium Alloy, Etc |
Product description and main performance
This machine is also called stationary edge milling machine, mainly
using the milling principle of small
plates need large groove milling edge and dedicated to the
development of new products. Table edge
milling machine product single processing edge milling width of 10
mm, the maximum processing to 18mm
edge width. Compared with the general machine type, the processing
capacity of table milling edge
machine is unmatched by other machine types. The machine
innovatively USES the rolling driven wheel
device, which eliminates manual piling, and the material can be
self-feeding after entering the material
port, making the feeding easier when the machine works. Applicable
to common structural steel, stainless
steel, cast iron, hard plastics, non-ferrous metals and other
materials. It is a special tool for cutting edge
of welding front end face. This machine has the advantages of
smooth surface, easy to use, low labor
intensity, high efficiency and low cost. It solve that problems of
flame cut, grinding of polishing machine,
large-scale milling machine, etc., the product is cheap and
beautiful, and the small machine can be used
as the best partner in the edge milling operation of your small
material
Technical Parameter
1. Feed torque is improved again,More stable processing
performance,The smooth finish of the groove reaches Ra3.2-6.3
2. The groove angle of the equipment can be adjusted freely between
30° and 60°.
3. easy to use,Easy to learn,Ordinary workers can operate multiple
devices at the same time
4. Single maximum slope width 10mm,Up to 18mm multiple times
5. Milling cold working method,The processed groove surface is not
oxidized,Stainless steel groove can be welded without pickling
6. Can be processed for small and medium plates,Knife tray with 4
blades,Each group can process 800-1200m,Very low consumables
